3D Printing from Vietnam.
Zero Tariffs. 30–50% Lower Cost.
SLA, SLS, MJF, FDM, and DMLS metal printing — sourced through Dewin's audited Vietnam factory network. $0 Section 301 exposure. Certificate of Origin documentation included.
6 technologies · 50+ materials · Prototypes from 24h · Production at scale · DDP delivery to US
Why US Buyers Are Moving 3D Printing to Vietnam
Section 301 Tariff Reference — 3D Printing HTS Codes
Sourcing additive manufacturing from China creates significant Section 301 liability. Vietnam eliminates it.
| 3D Printing Process | HTS Chapter | China Rate (est.) | Vietnam Rate | Authority |
|---|---|---|---|---|
| SLA / SLS / MJF Nylon Parts | 3926.90 | 25% + 7.5% | $0 | Section 301 List 3/4 |
| FDM Engineering Plastic Parts | 3926.90 | 25% | $0 | Section 301 List 3 |
| DMLS Stainless Steel Parts | 7326.90 | 25% | $0 | Section 301 List 3 |
| Metal Binder Jet — SS316L | 7326.90 | 25% | $0 | Section 301 List 3 |
| DMLS Aluminum Parts | 7616.99 | 25% | $0 | Section 301 List 3 |
| 3D Printed Tooling / Fixtures | 8480.71 | 25% | $0 | Section 301 List 3 |
Rates as published by USTR. Section 301 applies to Chinese-origin goods under Trade Act of 1974. Consult your customs broker for specific classification. Est. rates may vary with IEEPA executive orders.
6 Technologies. All Vietnam-Sourced. All Zero Section 301.
From rapid SLA prototypes to DMLS metal production parts — we match your application to the right process and verify origin documentation on every order.
SLA (Stereolithography)
SLS (Selective Laser Sintering)
MJF (Multi Jet Fusion)
FDM (Fused Deposition Modeling)
DMLS (Metal 3D Printing)
Metal Binder Jetting
Real Pricing: Dewin Vietnam vs US Service Bureaus
Same technologies, same quality — better pricing. And unlike China-sourced prints, no Section 301 tariff added at the border.
All figures are estimates. Get an exact quote for your part.
| Part / Technology | Xometry / Protolabs (est.) | Dewin Vietnam (est.) | Est. Savings |
|---|---|---|---|
| SLA prototype housing (80×60×40mm) | $45–65 | $22–35 | approx. 46–51% |
| MJF Nylon bracket (qty 50) | $12–18 ea | $6–10 ea | approx. 44–50% |
| SLS Nylon gear (qty 200) | $8–14 ea | $4–7 ea | approx. 44–50% |
| DMLS Ti64 aerospace bracket | $280–420 | $150–250 | approx. 40–46% |
| FDM CF-Nylon fixture (300mm) | $120–180 | $55–90 | approx. 50–54% |
Prices vary by geometry, material, quantity, and finish. Estimates only — actual quotes may differ. Section 301 tariff savings are additive for China-to-Vietnam switches.
When 3D Printing from Vietnam Makes Sense
3D printing isn't always the answer — but when it is, the time and cost advantages are dramatic.
Rapid Prototyping
Go from CAD to physical part in 24–72 hours. Test fit, form, and function before committing to expensive tooling. Iterate 3–5x faster than CNC or molding.
Best: SLA, FDM, SLS
Complex Geometries
Internal channels, lattice structures, organic shapes, and consolidated assemblies that are impossible to machine or mold. No tooling, no compromise on design.
Best: DMLS, SLS, MJF
Bridge & Low-Volume Production
Need 50–5,000 parts while your injection mold is being built? MJF and SLS produce production-quality nylon parts without tooling investment.
Best: MJF, SLS, Binder Jetting
Quality Documentation Included on Every Order
Unlike anonymous online platforms, Dewin provides verifiable origin and quality documentation — critical for CBP compliance and PPAP programs.
Certificate of Origin (Form B)
VCCI-issued Certificate of Origin confirming Vietnam manufacture. Required to support $0 Section 301 claim at CBP entry.
Dimensional Inspection Report
Pre-shipment dimensional check on every order. CMM reports available for precision parts requiring GD&T verification.
Material Certifications
Material test reports (MTRs) with full alloy traceability for metal printed parts. Nylon and resin material data sheets available for all plastic printing.
Pre-Shipment Photos
On-ground team photographs every batch before shipment. You see your parts before they leave Vietnam — no surprises on delivery.
50+ Materials Available
Nylons (SLS / MJF)
PA12 · PA12-GF (glass-filled) · PA11 · PA12-CF (carbon-filled) · TPU (flexible)
Tensile strength: 48–85 MPa · Elongation: 4–20%
Resins (SLA)
Standard · Tough (ABS-like) · Flexible · High-Temp (HDT 238°C) · Castable · Clear
Detail resolution: 25–100µm layer height
Thermoplastics (FDM)
ABS · PLA · PETG · Nylon · Polycarbonate · PEEK · ULTEM 9085 · CF-Nylon
Engineering-grade materials for functional parts
Stainless Steel (DMLS / BJT)
316L · 17-4PH · 15-5PH · 304L
Density >99.5% · Full mechanical properties after heat treatment
Titanium & Aluminum (DMLS)
Ti6Al4V (Grade 5) · AlSi10Mg · Scalmalloy
Aerospace-grade with full material certs available
Superalloys (DMLS)
Inconel 718 · Inconel 625 · Cobalt Chrome · Maraging Steel
High-temp applications to 700°C+
Dewin vs Other 3D Printing Options
Not all 3D printing sources are equal — especially when tariff exposure and quality documentation matter.
| Factor | Dewin Vietnam | Xometry / Protolabs | China Service Bureau |
|---|---|---|---|
| Section 301 Tariff | $0 — Vietnam origin | $0 — US origin (higher base price) | 25–145%+ est. |
| Unit Price | 30–50% below US bureaus (est.) | US market rate | Low base + high tariff = high landed |
| COO Documentation | ✅ VCCI Form B included | N/A — US origin | ❌ China origin — Section 301 applies |
| Pre-Shipment Inspection | ✅ On-ground team | Automated QC | Varies — often none |
| Material Certs | ✅ MTRs for metals | ✅ Available | Varies by factory |
| Combined with CNC/Molding | ✅ Same network | ✅ Multi-process | Separate suppliers typically |
| FTA Coverage | ✅ 16+ FTAs (Vietnam) | N/A | ❌ China FTA coverage limited |
| Supply Chain Risk | Low — diversified from China | Low — US-based | High — tariff + geopolitical risk |
We Deliver Finished Parts, Not Raw Prints
Every order includes support removal and cleaning. Add finishing options for production-ready parts.
Dyeing & Painting
Custom colors, RAL/Pantone matching, spray painting
Vapor Smoothing
Chemical smoothing for SLS/MJF — injection-mold-like finish
CNC Post-Machining
Machine critical surfaces to tight tolerances after printing
Metal Finishing
Heat treatment, HIP, anodizing, plating, and polishing for DMLS parts
How It Works
Upload Your Files
STL, STEP, OBJ, or 3MF files. Specify material, technology, quantity, and finishing requirements.
Quote + Tariff Breakdown
Detailed pricing within 24 hours. Includes technology recommendation and HTS tariff savings vs China sourcing.
Print, Inspect & Document
Parts printed, post-processed, and inspected in Vietnam. COO documentation prepared. Pre-shipment photos provided.
DDP Delivery to US
Delivered duty-paid to your dock. CBP clearance documentation included. Section 301 clearance on Vietnam-origin parts.
3D Printing FAQ — Tariff & Quality
Does Vietnam-origin 3D printing qualify for $0 Section 301 tariff treatment?
What 3D printing technologies do you offer?
How fast can I get 3D printed parts?
What materials are available for 3D printing?
Is 3D printing from Vietnam subject to reciprocal tariffs?
How do you verify quality on 3D printed parts shipped from Vietnam?
Can I get 3D printing plus CNC post-machining in one order?
How does 3D printing pricing compare to US service bureaus?
Ready to Eliminate Tariff Risk on 3D Printed Parts?
Upload your files and get a detailed quote with tariff savings breakdown within 24 hours. Vietnam-origin. COO documentation included.
Or email your files to leeloo@dewintech.com